Start on Hyperliquid from scratch
From your first wallet, or your first account, to a robot running on your own Hyperliquid account: five steps, and why each one.
Before you start
- The robot trades with YOUR capital, on YOUR account. Nothing is guaranteed: a position can end in a loss, and a run of losses can eat into the deposit. Only deposit what you accept to risk.
- Your funds stay at the exchange. We never touch them: the access you give us trades, it cannot withdraw.
- You stop whenever you want: from My robots, or by revoking the access at the exchange.
- This guide describes actions, not an investment: it says neither what to buy nor how much to deposit. Past results do not predict future results.
You need: a browser (Chrome, Brave or Edge), a sheet of paper for the recovery phrase, and a way to buy USDC: a card, or an exchange account that holds some. Allow one hour.
The menus described are those of Hyperliquid on 16 November 2026, taken from its official pages. An exchange sometimes renames its labels; the meaning of the steps stays.
1 · Create your wallet
Install MetaMask or Rabby
From the official site only: metamask.io or rabby.io, the extension for your browser. A wallet is a pair of keys that lives with you: nobody opens it for you, nobody can close it on you.
Create a new wallet
MetaMask: “Create a new wallet”, then the recovery phrase (“Secret Recovery Phrase”). Rabby: “Create a new address”, a password, then “Back up Seed phrase now”. The password only protects the extension on this computer.
Write down the recovery phrase
Twelve words, in order, on paper, kept offline. Never type it on a website, never photograph it, never put it in a cloud: whoever has it has everything. We will never ask for it, nor will anyone serious.
Find your address
It starts with 0x and copies with one click at the top of the wallet. It is what you give to receive funds, and what you paste here at step 4.
Why. Hyperliquid connects to an EVM wallet, and the API wallet of step 3 is authorized by a signature of that wallet. Hyperliquid also accepts an e-mail login, which creates a wallet for you; this guide follows the classic wallet: its address is what you paste here.
2 · USDC on Arbitrum, then the deposit
Obtain USDC on Arbitrum One
Either “Buy” in your wallet (card or bank transfer, provider depending on your country), or a purchase on a centralized exchange then a withdrawal to your wallet address (0x…) choosing the “Arbitrum One” network. Another network does not reach Hyperliquid.
Keep a little ETH on Arbitrum
On the same wallet, a few euros are enough: the deposit is an Arbitrum transaction, which pays its fees in ETH. After that, trading on Hyperliquid costs no network fee.
Connect to Hyperliquid
On app.hyperliquid.xyz: “Connect”, pick your wallet, sign. Then “Enable Trading”: one signature, free, which moves nothing.
Deposit
“Deposit”: the amount in USDC, 5 USDC at least (below that, Hyperliquid warns that the deposit is lost), “Deposit”, then confirm in the wallet. Credited in under a minute to your Perps balance, with no fee on Hyperliquid's side.
Why. Hyperliquid is its own chain: you enter it through a bridge from Arbitrum, in USDC only. Hyperliquid robots settle in USDC, on the Perps balance.
3 · The access that trades without withdrawing
One rule: the access you create has the right to trade, never the right to withdraw. Without that right, nobody can take a cent out of your account, even with the key.
Why. This is what makes the rental possible without entrusting us with money: the robot acts on your account with an access that can only trade. You revoke it whenever you want at the exchange, and the robot stops by itself.
Hyperliquid Create the key on Hyperliquid
Open the API page
On app.hyperliquid.xyz, wallet connected: menu “More” → “API”. Hyperliquid is a DEX: the key is an “API wallet” (agent) allowed to trade for your main wallet, never to withdraw.
Generate the API wallet
Give it a name, click “Generate”, then “Authorize API Wallet” and sign with your main wallet. Write down the API wallet's private key: it is shown only once.
What you paste with us
API key = the address of YOUR main wallet (0x…). Secret = the API wallet's private key (never your main wallet's). No IP whitelist on Hyperliquid.
One direction per pair
Hyperliquid has no hedge mode: one position per pair and per account. A long bot and a short bot on the same pair can both exist, but not hold a position at the same time: while one is in a position or waiting for its entry, the other sends nothing. To hold both directions at once, connect a second Hyperliquid account — another wallet, with its own agent key — and put the long bots on one and the short bots on the other. Hyperliquid's sub-accounts only open after $100,000 of volume, and the site does not handle them yet.
4 · Your account here, and the rental
Create your Hannya access
“Create an account”: a username, a password. In Security, you can enable two-factor authentication: every action that touches your money asks for your password again, and your code if it is enabled. Create an account
Pick your robot
In the catalogue, each Hyperliquid robot has its page: the pair, the side it takes, its closed positions over the last 90 days. Read it before renting. The Hyperliquid robots
Paste your access
“Rent”: at the first step of the page, paste your wallet address and the API wallet's private key, with a name for this account. Everything is encrypted on receipt and never shown again, to anyone; we read your balance at Hyperliquid to check that the access works.
Duration, account, contract
Three or six months, the account the robot runs on, then the terms and the robot contract, to be read: it says what the robot does and does not do. Then “Pay in USDC”.
Pay the rental
In USDC on Solana: the payment page gives the exact amount, a QR code and the address. From Phantom or another Solana wallet, “Open in my wallet” fills everything in; from an exchange, withdraw exactly the amount shown, in native Solana USDC. The robot starts as soon as the chain confirms.
Why. The rental is paid separately, in USDC on Solana: it does not touch your Hyperliquid account, where the robot only takes its positions. One robot, one pair, one account. Hyperliquid is one-way: a single position per pair and per account. To rent the long robot and the short robot of the same pair, you need two accounts. Hedge or one-way: what it changes
5 · What you see next
My robots
Each robot, its state (Running, Awaiting payment, Stopped), what it holds and until when it runs. “Stop” pauses it: it takes no new position; the open ones finish on their targets. You restart it with one click.
Positions
The open and closed positions of your account, with the entry price, the targets placed at the exchange and the realized result, read from the exchange.
Notifications
“Notify me of its actions” on My robots: every entry, every exit, in one sentence, on the Notifications page and on Telegram if you linked it.
At the end of the term
The robot stops by itself and lets its open positions finish on their targets. To go on, rent it again on the same account: the payment extends it.
The access has a lifetime
The API wallet expires at most 180 days after its creation: before the end, generate a new one and replace the key on the account's row in Accounts.
To cut everything
Revoke the access at the exchange: the robot stops by itself. Or “Delete” the account in Accounts: the encrypted key is erased. Positions already open remain yours, to close at the exchange or from Positions.
Why. The robot acts on your account: you must be able to see each of its moves and stop it at any time. Positions are read back from the exchange, not declared by us: what you see here is what the exchange holds.